Vista 10se manual

Enter 1 digit 0—9. Page 51 Section 14 — Data Field Descriptions A digit code is sent to the pager that is coded in the following format: 4-digit Subscriber No. Timing of this report is random with up to a minute delay.

Delays can be selected from 0 to seconds, in second increments. Do not use if previously programmed with other values. Transmit an open and close sequence.

If using a button-type Note: The [A] and [B] keys transmitter, press and release the button; Each of the input loops requires its own programming zone e. Press This display appears upon entry into this mode. If you are using a button- Note: The [A] and [B] keys type transmitter, press and release the button; The display at left appears.

Page 65 Section 15 - Zone Programming If you want to replace the serial number continue to step 4; otherwise, skip to step 7. A display for the new transmitter number appears. If necessary, press the [ ] key to back up without saving, and re- enter the serial number. If you are manually entering the serial number, use the [A] key to move forward within the screen, and the [B] key to move backward. Page 71 Section 16 - Output Device Programming If a relay is energized before a 4-wire smoke detector is reset, the relay will be stopped by the interruption of Aux.

Power that resets the smoke detector. If this is not desired, the power to the relay unit should be supplied from another 12V power source e. If not used, enter 0. Enter If you press 0 No , proceed to step 4.

Page 77 Section 18 — Alpha Descriptor Programming 9. Press [6] to accept the selected word. Note that the [4] key can be used to move the cursor to the left. Use the [6] key to make a space between characters. Remember, no word or word- string can exceed 10 characters including spaces.

Use only this list for selecting zone descriptors. Programming the control from a remote location is protected against compromise by someone attempting to defeat the system, using multi-levels of security protection: 1. Security Code Handshake: An 8-digit download ID code must be matched between the control and the downloader. Page Table Of Contact Id Event Codes "new" or "restore" , 3-digit event code, and 3-digit zone number, Reporting Format user number, or system status number see the following page.

When used, the system will act normally, but can silently notify the central station of your situation, if that service has been provided. Quick Arming Silence alarms by entering the security code and pressing [OFF] key.

UL Grade A. A dual-battery harness is provided with the kit. Both batteries will fit inside the panel's cabinet. Page 98 24 months from the date stamp control on the product or, for products not having an ADEMCO date stamp, for 12 months from date of original purchase unless the installation instructions or catalog sets forth a shorter period, in which case the shorter period shall apply.

Print page 1 Print document pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Do not press 97 if you program new values in place of the factory defaults— Each of the inputs requires its own programming zone e. Use only this list for selecting zone descriptors. Page 12 Type 20 This is a special-purpose zone type used with series wireless pushbutton Arm—Stay units which will result in arming the system in the STAY mode when the zone is activated.

Pushbutton units send zone number as a user number to central station when arming or disarming. The following is a list of all data fields in this control presented in numerical order. This list provides an explanation of each data field, and will serve as a reference for all fields in the system.

Enter 1 for yes; 0 for no. Enter 1 digit 0—9. Page 16 —— Example 1. Pager displays: This indicates that Subscriber No. Note that no restore reports are sent to the pager. With Ademco Contact ID Reporting: Enter any digit other than "0" in the first box, to enable zone to report This is an "enabling" code only and is disregarded in the actual reporting to the central office.

To enable, enter a code or 0 to disable in either or both boxes. Do not use if previously programmed with other values. OF FT. OF Print page 1 Print document 24 pages. Rename the bookmark. Delete bookmark?